Fuel Filter Element Water Seperatar Suits Bowl filter For Suzuki & Honda Outboards
FREE POST AUSTRALIA WIDE!
Marine/Outboard Fuel FilterĀ Suzuki
Top Quality German Filter Media
Viton Seals 10 Micron German Filter Media
Instructions:
Draining of water or replacement of element is determined by contamination level of fuel. Inspect the collection bowl for water daily and service as necessary. Replace element at least once a year or when a decrease of power is noticed.
To Drain Water:
- Loosen self-venting drain plug to drain water from bowl into a container.
- Tighten drain.
- Use primer bulb to fill filter with fuel.
- Start engine and check ensure there are no leaks.
Warning:
Improper Installation Or Use May Cause Fire/Explosion Resulting In Bodily Injury Or Death. Run Engine And Check For Fuel Leakage After Installation. Do Not Remove Bowl Except During Element Change.
To Replace Element:
- Loosen self-venting drain plug and drain the element into a container.
- Remove filter element from mounting bracket with bowl connected.
- Remove bowl from filter element and clean o-ring gland on bowl. Bowl is reusable * do not discard.
- Lubricate o-ring with oil or grease and install on bowl.
- Install bowl onto new element, tighten by hand.
- Lubricate filter top seal with oil or grease.
- Fill filter/bowl assemble with clean fuel and attach onto mounting bracket, tighten by hand.
- Start engine and check to ensure there are no leaks.
Specifications:
Thread Type / Size:Ā Honda Racor Thread 1" 14 T.P.I
Included:Ā Viton o-ring
Note:Ā Fuel FilterĀ Interchangeable with:
Sierra: 118-7920
Racor: S3227
Merc: 35-886638
Honda: 1760-ZW1-801AH
Suzuki: 99105-20005
PART NO: 37644
GET IT QUICK!Ā Ā SAME OR NEXT BUSINESS DAY DISPATCH
EXTRA 10% OFF ALL MULTI-BUYS AT CHECK-OUT (ON ALL PRODUCTS)
